Payment & Shipping Terms:
|Quantity Of Baking Tray:||20||Application:||Solid|
|Feature:||Automatic, Touch Screen,(explosionproof)||Temperature:||35-150 Degree C|
YZG Series Vacuum Drying Machine with the same function as oven but more effective for every material
FZG/YZG square and round static vacuum dryer
It is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.
it is well known that vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.
Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved.
Under the condition of vacuum, the boiling point of raw material will decrease and make the pushing form become greater. Therefore for a certain amount of heat radiation, the conducting area of evaporator can be saved.
The heat source for operation of evaporation may be low pressure steam or surpl us heat steam.
The heat loss of evaporator is less;
Before drying, the treatment of disinfection may be varied. During the period or dring, there is no impurity material mixing. It is in conformity with the requirement of GMP.
It belongs to static drier. So the shape of raw material to be dried cannot be destroyed.
If use condensate, the solvent in raw material can be recovered.
|interior size of chamber||Φ600×976||Φ1000×1527||Φ1400×2054||1500×1220×1400|
|exterior size of chamber||1153×810
|layers of baking shelf||4||6||8||8|
|interval of baking shelf||81||98||102||122|
|size of baking tray||310×600×45||460×640×45||460×640×45||460×640×45|
|number of baking tray||4||12||32||32|
|drying capacity kg||8||24||64||64|
|permitted pressure inside the pipe of baking shelf||≤0.784||≤0.784||≤0.784||≤0.784|
|temperature inside chamber (℃)||≤150||≤150||≤150||≤150|
|vacuum level inside chamber without load||-0.09～0.096|
|type and power of vacuum pump without condenser||SK-1.5 4kw||SK-3 5.5kw||Sk-6 11kw||SK-6 11kw|
|weight of drying chamber||250||800||1000||2100|
Material is under static conditions during operation of the equipment, which is benefit for keeping initial status of material, intermittent operation can adjust process conditions at any time.
On the top of FZG series dryer, heating system is arranged to tackle the problem of return of condensed water, in addition, air suction is arranged at the side to improve drying efficiency.
This equipment can be used for low temperature drying and solvent recovery, heat sources can be steam, hot water or heat conducting oil.
It is specially suitable for materials that is easily oxygenated during drying.