Payment & Shipping Terms:
|Feeding:||Powder Charge Additive||Polish:||Drawbench/mirror|
|Condition:||New||Item:||High Speed Mixing Granulator|
|TyPlace Of Originpe:||Jiangsu, China (Mainland)|
GHL-400 Series High Speed Mixing Granulating machine with spray clean ball,equipped with the vacuum feeding device
GHL-400 HIGH SPEED MIXER GRANULATOR
The machine adopts horizontal barrel(cone) structure. Its structure is reasonable.
The inner surface of equipment has no dead corner. It works at sealed state and conforms to the requirements of GMP.
Short granulating time, high eficiency and energy saving
The character of granule is uniform and the luidization of granule is good. It provides ideal granule material to tablet pressing procedure.
The machine adopts horizontal cylinder structure, its structure reasonable.
Air filled seal shaft for to drive. When washing , it can be changed to water.
Fluidized Granulation, the granule is around ball shape. Its flow ability is good.
Compared to traditional process, 25% of adhesive can be reduced and the drying time is short.
The dry mixing time is 2 minutes and the granulating time is 1-4 minutes. Compared to the traditional process , 4-5 times of efficiency is raised.
Dry mixing ,humid mixing and granulating are finished in the same sealed container. It is in conformity with the requirements of GMP.
The whole operation has strict safe and protective measures.
Jacket type might be adopted on request.
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to turn into a humid soft material.Then it is crushed at a high speed and become uniform granules.
|Capacity (Kg /batch)||0.3-1||3||15||35||50||60||80||100||135||200|
|Granules size (Mesh)||20-80|
|Working time (min)||5-7|
|Container volume (L)||7/2.5||10||50||100||150||200||250||300||400||600|
|Mixing power (Kw)||0.75||2.2||4/5.5||6.5/8||6.5/8||11/14||11/14||13/16||18.5/22||22/28|
|Cutting power (Kw)||0.75||1.1||1.3/1.8||2.4/3||2.4/3||4.5/5.5||4.5/5.5||4.5/5.5||6.5/8||9/11|
|Mixing speed (r/min)||30-1000||30-600||200/400||200/400||180/270||180/270||180/270||140/220||106/155||80/120|
|Cutting speed (r/min)||300-3000||1500/3000|
|Pressure of compressed air (Mpa)||0.3-0.6|
|Consumption of compressed air (m3/min)||None||0.1||0.11||0.13||0.2||0.25||0.25||0.3||0.4||0.4|
|Overall dimension of machine (L×W×H)||800× 450× 900||1250× 550× 1160||1730× 750× 1610||1950× 750× 1810||1950× 750× 1810||2210× 880× 2000||2210× 880× 2000||2310× 1050× 2000||2485× 1080× 2050||2585× 1400× 2100|